TeslaWall Connector (Gen 3)
The Tesla Wall Connector (Gen 3) is a EV charger with max. charging power (AC) 22.1 kW, phases 3 and connector tethered cable (Type 2).1
Key figures
Rules in Ireland
A home charger of up to about 7 kW usually fits within the standard 12 kVA supply (Maximum Import Capacity), so no upgrade application to ESB Networks is needed; if you would exceed it, apply online for a 16 kVA connection. Most Irish homes are single-phase, so 7.4 kW (32 A) is the typical maximum.
SEAI EV Home Charger Grant
UnknownUp to €300 towards buying and installing a smart charger listed on SEAI's Smart Charger Register; you do not need to own an EV, but you need off-street parking at the home, and work may only start after the Letter of Offer. One grant per property, installed by a Safe Electric-registered electrician; apartment developments use the separate Apartment Charging Grant (up to €600 per charge point).
Technical specifications
| General | |
|---|---|
| Connector | Tethered cable (Type 2)1 |
| Cable length | 7.3 m1 |
| Min. operating temperature | -30 °C1 |
| Performance | |
| Max. charging power (AC) | 22.1 kW1 |
| Electrical | |
| Phases | 31 |
| Max. current per phase | 32 A1 |
| Min. charging current | 6 A1 |
| Connectivity & smart | |
| Wi-Fi | Yes1 |
| Dynamic load balancing | Yes1 |
| Safety & metering | |
| RCD protection | Type A1 |
| Built-in 6 mA DC leakage detection | Yes1 |
| IP rating | IP551 |
| IK rating | IK081 |
| Dimensions & weight | |
| Width | 155 mm1 |
| Height | 345 mm1 |
| Depth | 110 mm1 |
| Weight | 6.8 kg1 |
Manufacturer documentation
- Product page
- Manual — Wall Connector 3 Install Manual – Type 2 Handle (EMEA, en-GB) – PDF van 03-08-2026
External links to Tesla's official website. The manufacturer may change or move documents; where they differ, the manufacturer's latest version applies.
Compare with
Frequently asked questions
What is the max. charging power (AC) of the Tesla Wall Connector (Gen 3)?
The max. charging power (AC) of the Tesla Wall Connector (Gen 3) is 22.1 kW.1
What is the phases of the Tesla Wall Connector (Gen 3)?
The phases of the Tesla Wall Connector (Gen 3) is 3.1
Which connector does the Tesla Wall Connector (Gen 3) use?
The connector of the Tesla Wall Connector (Gen 3) is tethered cable (Type 2).1
Does the Tesla Wall Connector (Gen 3) have dynamic load balancing?
Yes, the Tesla Wall Connector (Gen 3) has dynamic load balancing.1
Sources
- Wall Connector 3 Install Manual – Type 2 Handle (EMEA, en-GB), PDF van 03-08-2026 — Tesla, Inc. · accessed 27 Sept 2026
- SEAI EV Home Charger Grant — Sustainable Energy Authority of Ireland (SEAI)