ZaptecPro
The Zaptec Pro is a EV charger with max. charging power (AC) 22 kW, phases 3 and connector Type 2 socket.1
Key figures
Rules in Ireland
A home charger of up to about 7 kW usually fits within the standard 12 kVA supply (Maximum Import Capacity), so no upgrade application to ESB Networks is needed; if you would exceed it, apply online for a 16 kVA connection. Most Irish homes are single-phase, so 7.4 kW (32 A) is the typical maximum.
SEAI EV Home Charger Grant
UnknownUp to €300 towards buying and installing a smart charger listed on SEAI's Smart Charger Register; you do not need to own an EV, but you need off-street parking at the home, and work may only start after the Letter of Offer. One grant per property, installed by a Safe Electric-registered electrician; apartment developments use the separate Apartment Charging Grant (up to €600 per charge point).
Technical specifications
| General | |
|---|---|
| Connector | Socket (Type 2)1 |
| Min. operating temperature | -30 °C1 |
| Performance | |
| Max. charging power (AC) | 22 kW1 |
| Electrical | |
| Phases | 31 |
| 1↔3 phase switching | Yes1 |
| Max. current per phase | 32 A1 |
| Standby power | 3 W1 |
| Connectivity & smart | |
| OCPP | 1.6J1 |
| Wi-Fi | Yes1 |
| 4G/LTE | Yes1 |
| RFID card reader | Yes1 |
| ISO 15118 / Plug & Charge | Yes1 |
| Dynamic load balancing | Yes1 |
| Safety & metering | |
| RCD protection | Type B1 |
| IP rating | IP541 |
| IK rating | IK101 |
| Dimensions & weight | |
| Width | 258 mm1 |
| Height | 392 mm1 |
| Depth | 112 mm1 |
| Weight | 5 kg1 |
| Warranty & lifespan | |
| Warranty | 5 years1 |
Manufacturer documentation
- Product page
- Datasheet / specifications — Zaptec Pro – Product sheet – 22.02.2023
External links to Zaptec's official website. The manufacturer may change or move documents; where they differ, the manufacturer's latest version applies.
Compare with
Frequently asked questions
What is the max. charging power (AC) of the Zaptec Pro?
The max. charging power (AC) of the Zaptec Pro is 22 kW.1
What is the phases of the Zaptec Pro?
The phases of the Zaptec Pro is 3.1
Which connector does the Zaptec Pro use?
The connector of the Zaptec Pro is Type 2 socket.1
Which OCPP does the Zaptec Pro use?
The OCPP of the Zaptec Pro is 1.6J.1
Sources
- Zaptec Pro – Product sheet, 22.02.2023 — Zaptec Charger AS · accessed 27 Sept 2026
- SEAI EV Home Charger Grant — Sustainable Energy Authority of Ireland (SEAI)