SmappeeEV Wall
The Smappee EV Wall is a EV charger with max. charging power (AC) 22 kW, phases 3 and connector tethered cable (Type 2) or Type 2 socket.1
Key figures
Rules in Ireland
A home charger of up to about 7 kW usually fits within the standard 12 kVA supply (Maximum Import Capacity), so no upgrade application to ESB Networks is needed; if you would exceed it, apply online for a 16 kVA connection. Most Irish homes are single-phase, so 7.4 kW (32 A) is the typical maximum.
SEAI EV Home Charger Grant
UnknownUp to €300 towards buying and installing a smart charger listed on SEAI's Smart Charger Register; you do not need to own an EV, but you need off-street parking at the home, and work may only start after the Letter of Offer. One grant per property, installed by a Safe Electric-registered electrician; apartment developments use the separate Apartment Charging Grant (up to €600 per charge point).
Technical specifications
| General | |
|---|---|
| Connector | Tethered cable (Type 2) / Socket (Type 2)1 |
| Min. operating temperature | -25 °C1 |
| Performance | |
| Max. charging power (AC) | 22 kW1 |
| Electrical | |
| Phases | 31 |
| Max. current per phase | 32 A1 |
| Connectivity & smart | |
| OCPP | 1.6J1 |
| Ethernet | Yes1 |
| 4G/LTE | Yes1 |
| RFID card reader | Yes1 |
| Display | Yes1 |
| ISO 15118 / Plug & Charge | Yes1 |
| Dynamic load balancing | Yes1 |
| Safety & metering | |
| MID-certified meter | Yes1 |
| RCD protection | Type A1 |
| Built-in 6 mA DC leakage detection | Yes1 |
| IP rating | IP541 |
| IK rating | IK101 |
| Dimensions & weight | |
| Width | 300 mm1 |
| Height | 300 mm1 |
| Depth | 110 mm1 |
Variants1
The same model in several variants. The specifications above apply to all variants; this table shows what differs.
| Variant | Part number | Connector | Cable length | Weight |
|---|---|---|---|---|
| Black, socket | EVW4-332-BR-B | Socket (Type 2) | – | 6.3 kg |
| White, socket | EVW4-332-BR-W | Socket (Type 2) | – | 6.3 kg |
| Black, tethered cable 8 m | EVW4-332-C8R-B | Tethered cable (Type 2) | 8 m | 9.7 kg |
| White, tethered cable 8 m | EVW4-332-C8R-W | Tethered cable (Type 2) | 8 m | 9.7 kg |
| Black, tethered cable 8 m with shutter | EVW4-332-CS8R-B | Tethered cable (Type 2) | 8 m | 9.7 kg |
| White, tethered cable 8 m with shutter | EVW4-332-CS8R-W | Tethered cable (Type 2) | 8 m | 9.7 kg |
Manufacturer documentation
- Product page
- Datasheet / specifications — Smappee EV Wall – Technical specifications – v4 (EN, 23-06-2026)
External links to Smappee's official website. The manufacturer may change or move documents; where they differ, the manufacturer's latest version applies.
Compare with
Frequently asked questions
What is the max. charging power (AC) of the Smappee EV Wall?
The max. charging power (AC) of the Smappee EV Wall is 22 kW.1
What is the phases of the Smappee EV Wall?
The phases of the Smappee EV Wall is 3.1
Which connector does the Smappee EV Wall use?
The connector of the Smappee EV Wall is tethered cable (Type 2) or Type 2 socket.1
Which OCPP does the Smappee EV Wall use?
The OCPP of the Smappee EV Wall is 1.6J.1
Sources
- Smappee EV Wall – Technical specifications, v4 (EN, 23-06-2026) — Smappee NV · accessed 27 Sept 2026
- SEAI EV Home Charger Grant — Sustainable Energy Authority of Ireland (SEAI)